Shopping Cart

Your cart is currently empty.

FABTECH 2010

Tools USA and Paint-Booths will be attending FABTECH 2010.  FABTECH is North America’s largest metal forming, fabricating, finishing and welding event with over 1,000 exhibiting companies.

FABTECH
FABTECH Location

FABTECH 2010
Georgia World Congress Center
Atlanta, Georgia
November 2-4, 2010
https://www.fabtechexpo.com/

Going “GREEN” – Our History and Getting Started in Your Shop

Have you every built a deck, a table or a fence only to find out that you wasted 30, 40, or even 50% of the material purchased due to poor planning and design?

Standard Tools and Equipment Co. has been making collision repair equipment, spray booths and dust collectors since 1979. We have refined our processes and equipment to result in a waste level of only 7%.  Scrap steel is sent back to the mill to be processed into new steel; scrap wood is ground up by a recycler for use in chipboard products; and hazardous wastes are processed by federal government-approved waste handlers.
Continue reading Going “GREEN” – Our History and Getting Started in Your Shop

Autobody Equipment Financing

Tools USA now offers financing on a paint booth, frame machine or multi item purchases!  To take advantage of our new program, please call 800-451-2425.

To be approved for the financing, qualified customers must meet the following criteria:  1. located in EST zone, 2. acceptable credit, 3. agree to ACH monthly drafts,  4. minimum of 40% down payment, and 5. must finance $3000 which would require an order of $5000.

Financing rates will be between 10-14% with 24, 36, and 48 month lease options with a $1 buy-out.

Going Green in 2010

Today there is an increased awareness of protecting our environment from hazardous emissions and waste.  Everyone is ‘Going Green’ to reduce these environmental pollutants.  All types of companies are expected to address this matter, including firms operating spray booths.  Spray booth operations can reduce waste in one of two manners: a dramatic overhaul of the entire process or incremental improvements.

Dramatic overhauls are expensive because they typically require intensive planning and resources. By focusing on the materials and equipment companies also bypass an opportunity to improve their employees and business processes. Production is almost always impacted during a change of this type and often afterwards.  Even with an overhaul companies should not assume that all wastes will be eliminated.

Incremental improvements can be made in a manner that does not upset the production of a shop.  These improvements can be started immediately and scheduled with available resources, government incentives, and production requirements taken into account.  This is the process recommended by the Tools USA specialists.

Example of an Incremental Plan:

  • Benchmark current operations: material types and volumes used, liquid and solid hazardous waste recorded, gaseous emissions calculated, hazardous operations noted, and level of operator knowledge
  • Identify materials used to eliminate the most hazardous; many paint and solvent manufacturers now offer low-VOC options
  • Evaluate solid and liquid waste by identifying waste source, retraining employees, mixing precise materials for jobs,  and eliminating storage of excess material
  • Understand gaseous wastes and new filter options
  • Evaluate storage and spray guns

These steps require only a small investment and create a good foundation for future conversion to powder coating or waterborne paints and equipment.  A shop that understands and addresses existing issues with incremental improvements will recover investments for major changes more quickly than a shop that makes only a dramatic change.

Please contact Kelly Goudy or the technical staff at Tools USA if you have questions about ‘Going Green’ with your spray booth operation.

Canada – Waterborne Conversion

As of June 18, 2010, autobody shops, manufacturers, and distributers in Canada will be required to use waterborne compliant auto refinish coatings or a similar solution to limit VOC emissions into the environment.  Automotive body shops that have remaining inventory of non-compliant coatings will be able to use up their inventory as long as it was purchased prior to the implementation date.  These new regulations will impact products in Canada as well as products being shipped to Canadian shops.

Waterborne Paint Conversion for your Auto Body and Industrial Shop

Waterborne conversion is coming soon!  Auto Body Shop and Industrial suppliers will only be able to provide low VOC products after the conversion.  Is your shop ready or do you need insight as to how to make your collision or industrial shop waterborne compliant?  You might need paint equipment upgrades as well as additional training to ensure a smooth waterborne conversion.

What has your body shop done to get ready for the new standards?

When will your auto body shop convert?

Call or email Kelly for more information.  KellyG@Standardtool.com

Sign up to our newsletter & Receive Savings In Your Inbox

Sign Up

Copyright © 2024 Standard Tools and Equipment Co.. | Ecommerce Shopping Cart Software by Miva, Inc.