Sure-Cure Air Makeup Unit Inferno

Sure-Cure Air Makeup Unit Inferno

SKU: SC26K-VB8P Click Here for Specifications & Optional Features
$20,999.00

Normally: $21,499.00

Processing...

Sure-Cure Air Makeup Unit Inferno

SKU: SC26K-VB8P Click Here for Specifications & Optional Features

Normally: $21,499.00

$20,999.00

Shipping Weight: 3700.00 pounds

Product Description

26K Direct-Fired Air Make-up Unit from Standard Tools and Equipment Co.

The Sure-Cure Inferno is designed for use on larger truck and industrial spray booths.

Increase your production with a new AMU and cure your paint job in under an hour, increasing your daily productivity by up to 10X. Put it into cure mode at the end of the day and go home. The unit will shut off automatically when the paint is cured.

The Inferno comes pre-wired and fully assembled as two main assemblies for easy installation.

The ETL-certified units are designed, manufactured, and tested in our facilities in Greensboro, NC. We have the ability to design to meet your shop space demands.

  • 17,000 to 26,000 CFM
  • 2.6 million BTUs (natural gas or liquid propane)
  • All controls and major components are UL and/or CSA listed
  • ETL listed to ANSI Z83.4, cETL certified to CSA 3.7
  • Deluxe remote control panel for booth pressure, temperature, cycle times and booth lights
  • Quiet 20-hp AMU fan (65 dB)
  • 208-230/460V 3-phase required (single-phase power will require a customer-supplied phase transformer)
  • Variable frequency drive (VFD) included, controlling booth exhaust fan
  • 80-F temperature rise in spray mode; 100-F cure temp rise to 160-F
  • State-of-the-art aluminum burner and controls allows precise controls of temperatures and minimum maintenance
  • Multi-service disconnect for safety
  • Flame failure remote reset
  • Assembly instructions including permitting information
  • Auto shut-off due to excessive operating temperatures
  • Polyester powder coating over galvanized steel for durability
  • Comes in three vertical formats: outdoor with adjustable-height legs, indoor w/ top air supply port, indoor w/ side air supply port
  • Shipped as three sub-assemblies for ease of installation
  • Made and supported in North Carolina
  • Foot print: 60”Dx72”Wx174”H (vertical, outdoor version)
  • Shipping weight: 3700 lbs
SAFE
  • Certified by ETL/ Intertek to ANSI Z83.4b and CSA 3.7b(2013) and all controls and major components are UL and/or CSA listed.
  • MULTI-SERVICE DISCONNECT: Our single-point disconnect turns everything, including the lighting circuits, to the off position so that you will not experience electrical shock while servicing your unit.
  • FLAME FAILURE REMOTE RESET: If the burner fails to light under normal conditions, and sometimes they do, a red indicator light on the Sure-Cure® remote panel will display. With our remote reset feature, you no longer have to go to the main control panel to reset the flame. Simply push the red indicator button and the flame will reset. This feature comes standard with all of our units.
  • LOSS OF THERMOSTAT CONNECTION: If the connection to the thermostat is lost, the temperature controller returns to a low-fire position. With other units on the market, there is not a safeguard to prevent an uncontrolled high-flame that can only be stopped by manual reset.
  • AUTO SHUT-OFF: At the end of the Curing and cooling cycles, our unit will shut off completely. This allows you to be able to focus on other things, take a break or go home, knowing that your unit is safe and will turn off when it is complete.
Additional items include:
  • Wiring harness from remote control panel to Sure-Cure control panel
  • Supply ductwork components (to supply air to the Sure-Cure unit)
  • Discharge ductwork components (from the Sure-Cure unit to the spray booth)
**Not available in California

26K Direct-Fired Air Make-up Unit from Standard Tools and Equipment Co.

The Sure-Cure Inferno is designed for use on larger truck and industrial spray booths.

Increase your production with a new AMU and cure your paint job in under an hour, increasing your daily productivity by up to 10X. Put it into cure mode at the end of the day and go home. The unit will shut off automatically when the paint is cured.

The Inferno comes pre-wired and fully assembled as two main assemblies for easy installation.

The ETL-certified units are designed, manufactured, and tested in our facilities in Greensboro, NC. We have the ability to design to meet your shop space demands.

  • 17,000 to 26,000 CFM
  • 2.6 million BTUs (natural gas or liquid propane)
  • All controls and major components are UL and/or CSA listed
  • ETL listed to ANSI Z83.4, cETL certified to CSA 3.7
  • Deluxe remote control panel for booth pressure, temperature, cycle times and booth lights
  • Quiet 20-hp AMU fan (65 dB)
  • 208-230/460V 3-phase required (single-phase power will require a customer-supplied phase transformer)
  • Variable frequency drive (VFD) included, controlling booth exhaust fan
  • 80-F temperature rise in spray mode; 100-F cure temp rise to 160-F
  • State-of-the-art aluminum burner and controls allows precise controls of temperatures and minimum maintenance
  • Multi-service disconnect for safety
  • Flame failure remote reset
  • Assembly instructions including permitting information
  • Auto shut-off due to excessive operating temperatures
  • Polyester powder coating over galvanized steel for durability
  • Comes in three vertical formats: outdoor with adjustable-height legs, indoor w/ top air supply port, indoor w/ side air supply port
  • Shipped as three sub-assemblies for ease of installation
  • Made and supported in North Carolina
  • Foot print: 60”Dx72”Wx174”H (vertical, outdoor version)
  • Shipping weight: 3700 lbs
SAFE
  • Certified by ETL/ Intertek to ANSI Z83.4b and CSA 3.7b(2013) and all controls and major components are UL and/or CSA listed.
  • MULTI-SERVICE DISCONNECT: Our single-point disconnect turns everything, including the lighting circuits, to the off position so that you will not experience electrical shock while servicing your unit.
  • FLAME FAILURE REMOTE RESET: If the burner fails to light under normal conditions, and sometimes they do, a red indicator light on the Sure-Cure® remote panel will display. With our remote reset feature, you no longer have to go to the main control panel to reset the flame. Simply push the red indicator button and the flame will reset. This feature comes standard with all of our units.
  • LOSS OF THERMOSTAT CONNECTION: If the connection to the thermostat is lost, the temperature controller returns to a low-fire position. With other units on the market, there is not a safeguard to prevent an uncontrolled high-flame that can only be stopped by manual reset.
  • AUTO SHUT-OFF: At the end of the Curing and cooling cycles, our unit will shut off completely. This allows you to be able to focus on other things, take a break or go home, knowing that your unit is safe and will turn off when it is complete.
Additional items include:
  • Wiring harness from remote control panel to Sure-Cure control panel
  • Supply ductwork components (to supply air to the Sure-Cure unit)
  • Discharge ductwork components (from the Sure-Cure unit to the spray booth)
  • Shipping Quote

    Add this item to your virtual cart to find out how much shipping will cost instantly. Select "estimate shipping" in your online cart and enter your shipping zip code to see the cost. If you would prefer to receive a shipping quote via email, fill out the form below or give us a call at 800-451-2425. See details on our blog for more info about our online cart! Blog Shipping Quote Information

    You must javascript enabled to use this form.

    Tools USA Warranty

    Tools USA warrants to the original retail purchaser of an Eagle Lift, Tire Changer or Wheel Balancer that it will replace without charge, in the United states or Canada any part found under normal use, to be defective in materials or workmanship, for a period of one (1) year from date of purchase. Warranty covers parts only; purchaser is responsible for any and all labor requirements.

    Tools USA will cover warranty parts replacement shipping charges for the first 30 days after purchase. Purchaser is responsible for shipping costs after this time.

    Exclusions

    This warranty will not apply to any machine:

    1. Which has not been operated or maintained according to specifications
    2. Which has been abused, misused altered or improperly maintained
    3. Which has been improperly assembled and/or installed
    4. Requiring parts needed for normal maintenance, such as rubber pads, soap-buckets, brushes, plastic inserts, etc.

    Eagle Equipment reserves the right to make improvements and/or design changes to its equipment without any obligation to previously sold, assembled or fabricated equipment.

    There is no other express warranty on the Eagle Lift, Tire & Wheel Service equipment and this warranty is exclusive of and in lieu of all other warranties, expressed or implied, including all warranties of merchantability and fitness for a particular purpose.

    Tools USA shall not be liable for loss of use, inconvenience, lost time, commercial loss or other incidental or consequential damages

    Freight/Shipping

    Tools USA uses common carriers, FedEx Ground, UPS, and independent freight haulers for shipping. We negotiate the most competitive freight rates possible and pass these savings along to our customers. We make every effort to minimize freight charges to our customers and provide for timely delivery.

    Most items in stock will ship within two business days. Tools USA will not be liable for any damages related to unavailability of inventory or delays in shipping.

    Tools USA ships all products FOB our warehouses. Title for goods passes to customer when product leaves our dock.

    Items advertised with "Free Freight" applies only to shipments within the 48 contiguous states (excludes Alaska, Hawaii, and Canada and Mexico).

    Call Sales at 1-800-336-2776 for a specific freight quote.

    Delivery and Unloading

    Customer is responsible for unloading shipment from truck. Tools USA will assume no responsibility for any additional charges or damages that may be incurred as a result of unloading from the delivering carrier's truck.

    Freight carriers have restrictions on delivering to residential addresses and may require pick-up at freight terminal. Lifts will require a fork-lift to unload. It is advantageous in those cases to ship to a freight terminal where the terminal personnel will unload the product and load it onto the customer's trailer or truck. Lifts cannot be unloaded using a lift gate vehicle. We cannot advise customers of exact time of delivery as we do not ship on our own trucks. We will give our customers an estimated time of delivery and provide them with tracking information.

    All shipments must be inspected immediately upon receipt.

    For your protection, any external damage must be noted on the Bill of Lading at the time of delivery in order to qualify for a claim against the freight carrier. Concealed damages must be reported to the freight company within three days of delivery. It is the customer's responsibility to file for damage claims against the freight company. Shortages/missing parts must be reported to Tools USA customer service within seven days of delivery.

    For Paint Booths only, Customers have 30 days to report shortages/missing parts.