AS100 - Refrigerated Air Dryer - 100 SCFM (1 HP= 4.5 SCFM)
Efficient & Effective Technology Warm saturated compressed air enters an air to air heat exchanger where it is cooled by cold, dry compressed air passing in the opposite direction. The temperature of this partially cooled air is finally reduced to the required pressure dewpoint upon entering the refrigerant/air heat exchanger. The resulting condensate is separated by a demister mechanical separator, and discharged by a efficient automatic drain that wastes ZERO compressed air.
Specifications:
Every compressor needs an air dryer
No more oil, water, or contaminates in your air line
No more fish eyes
Keeps air clean in summer months
Environmentally friendly
Key Features & Benefits
Constant 38°F pressure dewpoint for guaranteed compressed air quality
Capillary injection for reliable operation
Compact full-size heat exchanger to handle overload conditions
Integrated WS-Series Condensate separator
Scroll-Refrigerant compressor - reduced power consumption. No crankcase heater required and instant start up*
Modern Full-Size heat exchanger design results in a low pressure differential and lower cost of operation
Compact design - Small footprint enables easy installation and full use of the floor space by being 30% smaller & lighter
Custom engineered packages available upon request
Environmentally friendly arctic star dryers uses safe R 407c which is more efficient than R134a
Reduced refrigerant required up to 65%. ZANDERs contribution in protecting the environment
Cycle Control - ensures that the dryer will never freeze for reliable operation
Technical Data & Dimensions:
Performance (CAGI Conditions)
- Air Flow (Scfm) - 100
- Pressure Drop (psi) - 1.95
Voltages (V/ph/Hz) - 115/1/60 - 230/1/60
Nominal Compressor Power (kW) - 0.71
Inlet Outlet Connections - 1 1/2" NPT-F
Refrigerant - R407C
Dimensions (inches)
- length - 24
- width - 22
- height - 31
|
